kelly

About Kelly Cramer

This author has not yet filled in any details.
So far Kelly Cramer has created 10 blog entries.

Positioning 3D Printing for Disaster Response

By |2026-10-17T16:45:23-04:00May 27th, 2024|Articles|

IC3D Piloting Regional Quality Control Centers In response to the critical shortages faced during the early stages of the COVID-19 pandemic, decentralized and democratized additive manufacturing (AM) of personal protective equipment (PPE) became a pivotal strategy to mitigate supply chain disruptions. However, the surge in production highlighted a significant gap in the ecosystem: quality [...]

Comments Off on Positioning 3D Printing for Disaster Response

IC3D’s Recycled Filaments: Game-Changing Sustainable Manufacturing

By |2024-05-17T09:30:25-04:00May 15th, 2024|Articles|

In the world of manufacturing, sustainability is no longer just a bonus; it's a necessity. As industries across the globe push towards greener practices, 3D printing stands out for its potential to reduce waste, minimize energy consumption, and lower the carbon footprint of production activities. At the forefront of this sustainable shift is IC3D, [...]

Comments Off on IC3D’s Recycled Filaments: Game-Changing Sustainable Manufacturing

Inside IC3D: Ryan Krammes

By |2026-10-17T16:45:23-04:00December 18th, 2021|Articles|

Growing up the typical Star Wars kid in Washington Court House, Ohio, Ryan Krammes became intrigued by special effects and the geeky art side of things. He moved to Columbus to study graphic design at Ohio State University. Krammes built his first 3D printer in 2015 and started taking commissions for making props [...]

Comments Off on Inside IC3D: Ryan Krammes

Inside IC3D: Maria Caracciolo

By |2026-10-17T16:45:23-04:00November 24th, 2021|Articles|

After graduating from Ohio State University with a degree in Theatre Management, Maria Caracciolo’s curiosity — and growing travel bug — brought her to South Korea where she taught English as a Second Language for two years. On her return, Maria continued to work in ESL, working with elementary and middle school students in [...]

Comments Off on Inside IC3D: Maria Caracciolo

Inside IC3D: Sean Moran

By |2022-02-11T16:14:53-05:00October 1st, 2021|Articles|

Back in 2015, Sean received his first 3D printer —a hand-me-down knockoff PrusaI3 with a clear acrylic frame — from his brother. Like most, he went down the rabbit hole of community designed 3D models. He had an introduction to 3D modeling through school and wanted to be able to make that knowledge [...]

Comments Off on Inside IC3D: Sean Moran

Inside IC3D: Anthony Amador

By |2022-02-11T16:16:17-05:00September 1st, 2021|Articles|

When Anthony Amador joined the team in 2017 as an intern, he was already an IC3D filament customer and a freelance 3D printer for hire. Energized by the increasing access and expanded development of RepRap 3D printers, he bought a LulzBot TAZ and started making car parts, random tools, and fixtures for both himself [...]

Comments Off on Inside IC3D: Anthony Amador

Inside IC3D: Matt Organiscak

By |2022-07-29T15:25:31-04:00July 20th, 2021|Articles|

Matt Organiscak spends much of his time scheming about empowering everyday people with progressive technology. An entrepreneur at heart, he has been the Chief Operations Officer at IC3D since 2014. Organiscak leads operations, print service job quoting, and customer satisfaction at IC3D — lending his expertise in engineering and 3D printing to prosumers worldwide. [...]

Comments Off on Inside IC3D: Matt Organiscak

Inside IC3D: Katie Burns

By |2022-02-11T16:17:14-05:00June 24th, 2021|Articles|

Katie Burns' personal mission is to capture as much of history as possible through 3D scanning. Burns came to IC3D as an established 3D scanner — curating complex and historical objects for posterity. Burns developed her attention to detail from working as a naturalist in both the Cleveland Metroparks and Summit Metro Parks [...]

Comments Off on Inside IC3D: Katie Burns

Inside IC3D: Luke DeBruin

By |2022-02-11T16:22:40-05:00March 30th, 2021|Articles|

Luke DeBruin is really into two things: sustainability and energy. Every day, he rides into work on an ebike he built himself using a lithium ion battery, bike kit, and parts he printed in IC3D’s print shop. Luke DeBruin is the artist behind the palette of production grade 3D printing filament as the leading [...]

Comments Off on Inside IC3D: Luke DeBruin

Inside IC3D: Jon Shell

By |2022-02-11T16:26:38-05:00February 3rd, 2021|Articles|

Jon Shell brings a decade of large-format additive manufacturing experience to IC3D as our Hardware Product Manager to help bring the Virago 700 3D Printer to an eager audience. With a background in aerospace electronics and automotive manufacturing, he has amassed many accomplishments: managing the unique Longaberger Company facility, orchestrating distribution for the Autozone [...]

Comments Off on Inside IC3D: Jon Shell

Title

Go to Top